Construction Materials›Adhesives & Chemicals

1. General information about the product Product type: Polyurethane foam/Adhesive (Polyurethane Foam Adhesive). Weight: 1050 gr, volume 750ml Shelf life: 12 months. Manufacturer: Shandong Sipaier New Materials Co., Ltd. / Shandong Youkeshu New Materials Co., Ltd. (China). Standard: JC936-2004. 2. Temperature and technical characteristics Usage temperature (can and environment): +5°C to +35°C. Temperature resistance after curing: -30°C to +80°C. Tack-free time: approximately 10 minutes. Cutable time: after 30–60 minutes. Full curing time: stabilizes within 3–5 hours. 3. Instructions for use (Use Steps) Surface preparation: Keep the surface clean from dust, oil and dirt, light water spray improves adhesion. Shaking: Shake the can thoroughly for at least 1 minute before use. Installing to gun: Screw the can into the assembly gun with the can pointing down and slowly press to dispense at a measured rate. Waiting for curing: Wait approximately 1 hour for the foam to fully cure before proceeding to the next step. 4. Safety measures (Note) Store out of reach of children. Protect from direct sunlight and temperatures above +50°C. Wear special gloves and goggles during work. Ensure good ventilation of the room and do not smoke nearby.

1. 1Meet in a public place and check the item before paying.
2. 2Keep the conversation in Egasi chat.
3. 3Ask for a receipt or warranty card if there is one.
4. 4Never send a deposit before you have seen it.